Drilling Waste Management and Cement Industry

Drilling_WastesDuring the exploration and production of oil, huge amounts of drilling wastes are produced in the form of mud and cuttings.  As per conservative estimates, around 0.37 kg of drilling wastes is generated for every barrel of oil produced. The American Petroleum Institute (API) has estimated that approximately 1.21 barrels of total drilling wastes are generated for every foot drilled.

The Middle East oil and gas industry has made a lot of effort in order to reduce the environmental impact of their activities; modern drilling methods such as horizontal drilling, navigating the drill bits three dimensionally through the earth, contacting and economically producing resources while minimizing surface disruption. Drilling wastes must be properly managed to prevent negative impact on human health as well as on the environment.

Drilling Waste Management

Drilling waste management technologies and practices can be grouped into three major categories: minimization, recycle/reuse, and disposal. The first step in managing drilling wastes is to separate the solid cuttings from the liquid drilling mud. Once solid and liquid drilling wastes have been separated, companies can use a variety of technologies and practices to manage the wastes. For some applications, drilling wastes are solidified or stabilized prior to their ultimate management practice.

Drilling wastes, such as cuttings, are indifferent and not of specified quality. The cuttings separated from the mud at the shale shakers may be coated with so much mud that they are unsuitable for the next reuse or disposal step or are difficult to handle or transport. Constituents of the cuttings or the mud coating them (e.g., oil, metals) may leach from the waste, making them unsuitable for land application or burial approaches.

Various materials can be added to cuttings to solidify and stabilize them. Still this can be an opportunity for cement plants to use uncontaminated cuttings as substitute raw material, even in a lower substitution. The use of such raw materials will be more environmental friendly then the common practice of oil companies to spread such cuttings on the land.

Several different approaches are used for injecting drilling wastes into underground formations for permanent disposal. Slurry injection technology, which involves grinding or processing solids into small particles, mixing them with water or some other liquid to make slurry, and injecting the slurry into an underground formation at pressures high enough to fracture the rock. As these muds could be used as fuel resource and substitute other fossil fuels, it is preferred to process the muds and use them.

Use of Drilling Wastes in Cement Industry

Thermal technologies use high temperatures to reclaim or destroy hydrocarbon-contaminated material. Thermal treatment is the most efficient treatment for destroying organics, and it also reduces the volume and mobility of inorganic such as metals and salts. Additional treatment may be necessary for metals and salts, depending on the final fate of the wastes. Waste streams high in hydrocarbons (typically 10 to 40%), like oil-based mud, are good candidates for thermal treatment technology.

The use of drilling wastes and muds is most preferable in cement kilns, as a cement kiln can be an attractive, less expensive alternative to a rotary kiln. In cement kilns, drilling wastes with oily components can be used in a fuel-blending program to substitute for fuel that would otherwise be needed to fire the kiln.

Drilling muds can be used in cement industry as a source of energy

Cement kiln temperatures (1,400 to 1,500 degrees C) and residence times are sufficient to achieve thermal destruction of organics. Cement kilns may also have pollution control devices to minimize emissions. The ash resulting from waste combustion becomes incorporated into the cement matrix, providing aluminum, silica, clay, and other minerals typically added in the cement raw material feed stream.

Recent studies have shown that it is feasible to use such drilling waste as substitute fuel in a cement plant. The drilling mud can be processed by a centrifuge to separate remaining water, compressed by a screw into a solid pump and conveyed.

The cement industry can play a significant role in the sustainable development in the Arab countries, e.g. by reducing fossil fuel emissions with the use of refused derived fuels (RDF) made from municipal solid waste (MSW) or hazardous waste such as oil spilling.

The cement companies in the Middle East can contribute to sustainability also by improving their own internal practices such as improving energy efficiency and implementing recycling programs. Businesses can show commitments to sustainability through voluntary adopting the concepts of social and environmental responsibilities, implementing cleaner production practices, and accepting extended responsibilities for their products.

Tagged , , , , , , , , , , , , , , , . Bookmark the permalink.

About Dirk Lechtenberg

Dirk Lechtenberg is a pioneer in the production and use of alternative fuels. He is the founder and Managing Director of the consulting company MVW Lechtenberg & Partner (Germany). He is the recipient of the Global Fuel award 2012 by the Cement & Lime Magazine.

8 Responses to Drilling Waste Management and Cement Industry

  1. Pingback: Drilling Waste Management and Cement Industry | EcoMENA « Cleantech Solutions

  2. Mohamed Sarfdeen Rakeeb says:

    Dear Sir,

    This is a good news for the cement factory that the drilling waste can be managed and the usage of fossil fuel can be significantly reduced which can contribute to minimize the environmental damages

    Mohamed Sarifdeen Rakeeb

  3. yandrapalli kiranmai says:

    Dear sir,

    This is a fantastic news to here for an environmental lover like me… , really one of the best idea to
    transfer the drilling waste. keep your updates, I love to be a part of this.

    kiranmai

  4. Steel Hopper says:

    If drilling waste can really be used as a substitute for fuel, then this is very significant in terms of saving the environment. It doesn’t just cut cost on fuel (thus saves energy too), it will also solve the problem of accumulated drill waste from cement companies. The only question is if the companies themselves are willing to invest in it.

  5. Rameez Shahid says:

    Hi,
    I am an environmental engineering student, doing research on drill cuttings reuse. This article was very morale boosting for my research paper. Just a couple of question and request from you, if you have/know any publish research regarding the use of drilling waste as a potential fuel for cement plants? I would appreciate if you can share with me. Thanks

    • Salman Zafar says:

      Dear Rameez

      Thanks for your comment. Glad to know that you liked the article. I will send couple of useful documents via email soon.

      Best wishes

      Salman Zafar

      Founder, EcoMENA

  6. ALI BENLAMOUDI says:

    Thank you sir for this inspiring article. Actually, I am a PhD student working on the reuse of petroleum sludge, but I could not find published articles related to cement and sludge as raw material. Could you please provide me some?

  7. Pingback: A Glance at Drilling Wastes Management | Cleantech Solutions

Share your Thoughts

This site uses Akismet to reduce spam. Learn how your comment data is processed.