Thermal (or thermochemical) conversion systems consist of primary conversion technologies which convert the waste into heat or gaseous and liquid products, together with secondary conversion technologies which convert these products into the more useful forms of energy being heat and electricity.
A wide range of technologies exists to convert the energy stored in wastes to more useful forms of energy. These technologies can be classified according to the principal energy carrier produced in the conversion process. Carriers are in the form of heat, gas, liquid and/or solid products, depending on the extent to which oxygen is admitted to the conversion process (usually as air).
The three principal methods of thermall conversion corresponding to each of these energy carriers are combustion in excess air, gasification in reduced air, and pyrolysis in the absence of air.
Conventional combustion technologies raise steam through the combustion of wastes. This steam may then be expanded through a conventional turbo-alternator to produce electricity. Fluidized bed combustors (FBC), which use a bed of hot inert material such as sand, are a more recent development. Bubbling FBCs are generally used at 10-30 MWth capacity, while Circulating FBCs are more applicable at larger scales.
Gasification of wastes takes place in a restricted supply of oxygen and occurs through initial devolatilization of the biomass, combustion of the volatile material and char, and further reduction to produce a fuel gas rich in carbon monoxide and hydrogen. This combustible gas has a lower calorific value than natural gas but can still be used as fuel for boilers, for engines, and potentially for combustion turbines after cleaning the gas stream of tars and particulates.
Pyrolysis is the term given to the thermal degradation of wood in the absence of oxygen. It enables wastes to be converted to a combination of solid char, gas and a liquid bio-oil. Pyrolysis technologies are generally categorized as “fast” or “slow” according to the time taken for processing the feed into pyrolysis products. Using fast pyrolysis, bio-oil yield can be as high as 80 percent of the product on a dry fuel basis. Bio-oil can act as a liquid fuel or as a feedstock for chemical production.
Republished by Blog Post Promoter