Polylactic Acid – An Emerging Bioplastic

During the last decade, the movement towards bio-based products has increased dramatically as a result of increasing environment awareness and high increase in fossil fuel prices. That is why companies like Polymer Chemistry Innovations must offer products based on new environmental trends. Polylactic Acid (PLA) is an eco-friendly bioplastic derived from lactic acid which can be produced by fermentation of renewable resources. It is a new type of biocompatible material produced from utilizing lactic acid as monomer. Since lactic acid is a non-toxic component, which exists in human metabolism, PLA is safe polyester for human-related applications.

PLA-bioplastics

In comparison to traditional plastics, PLA has great potential in the plastic market. Petroleum-based plastic takes hundreds of year to biologically degrade and is manufactured from non-renewable resources. PLA, on the other hand, is recyclable, produced by less energy-intensive process and compostable. Infact, it is a polymer which can be naturally converted to carbon dioxide and water within few years.

Feedstock Selection

Many raw materials could be utilised to produce lactic acid such as, starch, lignocellulosic biomass, agro-industrial wastes, glycerol and microalgae. In order to choose the most suitable biomass for an efficient process, the raw material should have the following characteristic.

  • As cheap as possible to make the maximum profit from the project
  • Low level of contaminants which means less cost on pre-treatment of the biomass to purify the main substrate.
  • Rapid production rate, more harvested product should be obtained per annum.
  • High yield with less by-products formation.
  • Continuous production rate along the year to minimise the raw material storage.

It seems impossible to have 100% ideal raw material so a trade-off decision must be made. Moreover, the combination of more than one raw material is even possible if the second one is given for free, for example, provided that the chosen microorganism can convert both raw materials to lactic acid without an extra cost. Production of lactic acid from waste has been studied by many researchers. However, the two promising materials are paper waste and glycerol. Moreover, potato and corn starch effluent have been used as a free raw materials for lactic acid production.

Glycerol is the main by-product of the biodiesel production process therefore it would be a really cheap feedstock to be used in the production of fuel and chemicals. Ten percent of the total biodiesel production is by-product crude glycerol which could have a negative effect on the environment to be disposed. Production of chemical from this by product could minimise the price of the biodiesel as it is produced at a relatively large quantity.

Office automation paper could be pre-treated and then converted to lactic acid by a specific microorganism. Different types of pulp, hemicellulose, and toner or ink-related compounds can reduce the production rate of lactic acid.

Undoubtedly, the best carbon source for most microorganisms is glucose which could be easily utilized in large scale lactic acid production. The second preferred carbon sources are starch and lignocellulose materials which have been recognized as a cost effective raw material. However, it is more difficult to ferment lignocellulosic biomass than starchy ones to lactic acid. This is because lignocellulosic biomass has cellulose as the polymer which requires physic-chemical pretreatment and multi-enzymatic reactions.

Microorganism Selection

In general, microbial lactic acid is mainly produced by two types of microorganisms which are bacteria and fungi. The enantiomers, yields and concentration of lactic acid depend on the type and the strain of microorganism. Each microorganism requires specific raw material to be utilised to give specific productivity in the optimum culture conditions.

Applications of PLA

PLA finds wide applications due to its unique properties. PLA is being used for food packaging, automobiles, textiles, foams, films etc in Europe, North America and the Asia-Pacific. Europe is the dominant market for biodegradable polymers, accounting for more than half of the world consumption.

The key market drivers in Europe include a packaging waste directive to set recovering and recycling targets, a number of plastic bag bans, and other collection and waste disposal laws to avoid landfill. As far as Middle East is concerned, use of PLA or other bioplastics is in nascent stages and its current penetration is very negligible.

Tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.

About Sakhr Alhuthali

Sakhr Alhuthali is an environmental activist who is interested in sustainable technologies, biorefineries, low grad heat, waste treatment and emissions reduction strategies. He holds Bachelors and Masters degrees in Chemical Engineering and is an associate member in IChemE and Energy Institute, UK.

6 Responses to Polylactic Acid – An Emerging Bioplastic

  1. Michelle Rose Rubio says:

    This is an interesting and informative article. It’s good to know that more biodegradable alternatives to petroleum-based plastics are being developed and are currently used in many industries.
    Since current PLA production relies mainly on corn for its raw material, don’t you think it would compete and adversely affect food supply?

  2. Sakhr Alhuthali says:

    Thanks for your comment and question, indeed it mightaffect the food supply as the corn prices increased dramatically in Mexico when America announced its bio-ethanol projects. I have not looked at the life cycle analysis of the bio plastic and the ILUC, indirect land use change. I personally do not think the food supply would change greatly as 20% of the corn production in the US is already converted to bioethanol. However, it depends on the land and the chosen country to build the industry in from a middle eastern point of view the dates could be used as the feedstock however this has not been assessed as most of the researches are conducted in the US and China. The food or even paper waste could also be utilised as well there are many alternatives to the corn.

  3. Pingback: 5 Sustainable and Eco-Friendly Coffee Drinking Habits | EcoMENA

  4. Pingback: Bioplastics: Making an Informed Decision | BioEnergy Consult

  5. Pingback: Teysha Technologies Partners with the Kind Planet Company | EcoMENA

  6. Pingback: Os desafios para utilização de materiais biodegradáveis - Materiais Júnior

Share your Thoughts

This site uses Akismet to reduce spam. Learn how your comment data is processed.